www.whitewing.co.uk

48 channel DMX dimmer  RGBDIM48USB Mk.2

96 channel version also available - details here
See also :
32 channel and 24 Channel drivers for constant-current LEDs and OLEDs
8 and 16 channel dimmers for AC mains LED lamps
16 channel DMX Relay  
TinyDMX miniature controller for RGB/RGBW LED strips

• Controls constant-voltage 12v or 24v LED strips (monochrome, RGB or RGBW). Supply voltage must be same as load voltage (9-28V).
• Up to 2 amp per channel (=24W @ 12v, =48W @ 24V), 12 amps per bank of 12 channels. All outputs short-circuit protected.
• Connection via plug-in terminal blocks for quick installation and maintainance
• Can also be used to control other loads subject to electrical suitability, e.g. small bulbs, DC fans (250Hz PWM frequency, others via custom firmware).
• Gamma correction option for smooth fades with monochrome LEDs
• Multiple built-in standalone test modes allow cabling & LED installation to be tested without a DMX source
• DIN rail mounting.
• Internal smoothing/crossfade function allows smooth transitions with low DMX framerates.
• Timeout to blank outputs on loss of DMX data. Optional timeout to blank if channels don't change (e.g. host PC crashes but local artnet converter still sending DMX)
• DMX connection via RJ45 (standard ESTA pinout) allow daisychaining with standard CAT5 cables, and plug-in terminal block simplify connection to other cabling.
• Easy firmware update via USB memory stick.
• IP67 packaged version available as special order.
• Custom firmware versions can be supplied for special applications, e.g. higher channel counts using higher baudrates on RS485 or RS422, custom dimming curves, standalone playback from USB stick, control/trigger inputs, sensing inputs.

    Detailed documentation  Here

Price (1x) £250 + VAT. Shipping not included. Available ex stock - please email for further details